Service Manual, Elna DE Details. Elna Model DE Serger Machine Service Manual, 20 Pages. The physical copy of the instruction manual is a soft cover. Full text of “Elna Serger Instruction Manual dse de e” IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic. Hi there, Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this.
|Published (Last):||5 July 2017|
|PDF File Size:||7.60 Mb|
|ePub File Size:||14.74 Mb|
|Price:||Free* [*Free Regsitration Required]|
Overlooking Inside Corners 1.
manusl Posted on Jan 02, The machine is now ready to sew. Left needle thread – Blue thread guides Incorrect threading will result in several problems such as skipped stitches and thread breakage.
A manual for elna 614DE – Elna Sewing Machines
The stitches are irregular or skipped – Incorrect threading. The greater the pressure on the control, the higher the speed. Do not raise the presser foot at the end of a seam but always sew a chain of thread at least 10 cm long. Remove the sewing foot 6144de page 5 and the needle plate see page To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. manuxl
Safety Device Model The front door is provided with a safety device. A Pin-Tucks Disengage the moving blade see page 11 Fold the fabric along the line to be pin- tucked, sew along the folded edge and press.
Sew on a scrap of fabric and adjust the tensions according to the illustration, depending on the desired finish. These links may help: However, when the differential feed control slide c is set at 1. For very slippery fabrics, tighten the knob clockwise slightly to increase the pressure. Special care is required around the sewing needle and moving blade.
Hello Pieter, here you go: I can email for free. Do not pull the fabric; guide it gently.
Full text of “Elna Serger Instruction Manual dse de e”
However, you can easily change the stitch length by shifting the stitch length slide a between 0. Jun 29, Elna Sewing Machines.
When using the left needle tension Bluethread the left L needle. Want Answer 1 Clicking this will make more experts see the question and we will remind you when it gets answered.
Snip the needle thread s at intervals. Tell us some more! Open the front door. You can start overlocking from the edge of the fabric just by feeding it into 614ce front of the lowered presser foot.
When you reach the end of the fabric, stop stitching with the needle above the fabric.
To reduce the risk of electric shock: Push the lever f down and hook the thread on the guide gpush the lever f up to the woking position, then pass the thread through the eye h at the far right end of the looper.
If the thread tensions are too tight, the fabric will pucker. Manusl pushing the differential feed slide c down to a higher number, the front feed dog a moves the fabric faster, as shown.
Unfold the fabric, pull the ends of the thread to the underside and press flat. Have a manual for Elna Sewing Machines? Gently pull the chain of thread out from the needle plate, leaving 2 or 3 loops of thread on the stitch finger.