The Model is a versatile unit which utilises the best of modern technology to simplify operation without sacrificing accuracy or reliability. Buy Jenway Standard Digital pH Meter Kit, glass electrode, ATC, buffers; V and more from our comprehensive selection of Jenway Benchtop pH Meters. Jenway™ Bench Meters Model ; Type: pH/mV/Temperature; Includes glass combination pH electrode, electrode stand and holder, ATC probe, BNC.
|Published (Last):||7 June 2015|
|PDF File Size:||12.14 Mb|
|ePub File Size:||1.94 Mb|
|Price:||Free* [*Free Regsitration Required]|
AUTO relates to the Jenway buffer types supplied with the instrument.
It is only necessary to keep the external surfaces clean and free from dust. Symbol will flash while adjustment is being made. Provides direct readout in pH and millivolts of samples and standards.
This key is also used to clear readings from Memory. Each result will be stored in the next available memory location. Don’t have an account? By pressing ‘print’ button you will print only current page. The connections are as follows: Where there is a possibility that injury, interference and may be expected not to damage or loss might occur if equipment malfunctions interfere with, or be a ected by, other equipment with due to radio frequency interference, or for general similar quali cations.
If a separate reference electrode is to be used, this should be connected to the Ref socket. The data bits and parity will automatically adjust as the baud rate is selected. CAL 3 Immerse the electrode s in the third buffer solution and allow the instrument to stabilise.
The memory location will be given on the status display. Interfacing The Bi-directional RS interface is available on the rear panel 9 way D type connector.
Bench pH/mV Meter – Jenway – PDF Catalogs | Technical Documentation | Brochure
The Model is supplied ready to use. When using manual temperature compensation no ATC probe fitted the solution temperature should be measured and the value entered in the set up menu prior to calibrating the instrument refer 3. Connection socket for separate reference electrode.
Safety Please read this information carefully prior to installing or using this equipment. Got it, henway to print.
Mode annunciators — shows selected measurement mode; pH, mV Absolute and Relative. Page 3 Safety Please read this information carefully prior to installing or using this equipment.
Jenway 3510 pH Meter
The unit described in this manual is designed be operated only by trained personnel. Up to 3 decimal place resolution is available.
It is then called a combination electrode. The Bi-directional RS interface is available on the rear panel 9 way D type connector.
Connect the printer via the cable supplied with the printer to the 9 way socket located on the rear panel of the instrument. For the majority of tests carried out on aqueous solutions, with a reasonable ionic strength; at ambient temperatures and with limited use in strongly acidic or alkaline solutions, the standard glass or epoxy bodied combination electrode is ideal.
Usage of other units will cause the not to operate. The correct values should be entered and saved as for the 1 point calibration.
Jenway Laboratory pH/mV/Temp. Meter Model 3510
Buffer solutions should be carefully prepared as per the manufacturers instructions. These deviations will change slowly during the life of an electrode. Good Practice Guidelines 3. To set these parameters: Troubleshooting Usage of other units will cause the not to operate.
Table of Contents Add to my manuals Add.
Page 35 and so we cannot guarantee that interference will not This product meets the applicable EC harmonised standards for radio frequency occur in jehway.